|
Securing the electrical service, terminating the natural gas
supply, and/or silencing the alarm system are items all of which may
need to be dealt with during even the most basic incident. However
they too, can be some of the most frustrating to locate and secure.
Our utility/service floor plan products can drastically enhance this
process by locating the exact location of these, along with other
utilities, services, and systems which you may need to consider at a
given property. This need not be limited to what would be considered
a traditional building service or utility, diagramming other systems
within a commercial property may someday make a huge difference in
the outcome of an incident. Think of outlining materials handling
equipment in an industrial facility, a dust collection system
servicing a manufacturing plant, or the pumping schematic of your
local waste water treatment plant.
|
Consider enhancing your project by including the following, |
|
|
|
Utilities |
|
|
|
|
Diagram the Complete System via Schematic of System
Though Out the Entire Structure |
|
|
|
|
Highlight the Service Entrance and Exit |
|
|
|
|
Identify Master Control Valves Or Switching. |
|
|
|
|
Identify and Label All Sub Panels, Zones, Control Valves
or Switching |
|
|
|
|
All Pipes Label Pressure, Diameter, Temperature of
Product/Material, Direction of Flow |
|
|
|
Safety, Fire and Damage Control Systems |
|
|
|
|
Diagram the Complete System Schematic Through Out the
Entire Structure |
|
|
|
|
Locate Master Control Valves, Switching, Alarm Panels
and Sub-Panels. |
|
|
|
|
Locate And Label Protection Zones, Zone Control Valves
And Other Control Devices. |
|
|
|
|
Identify Extinguishing Agent Label by Zone |
|
|
|
|
Locate Sampling, Measuring, Visual Alerting, Audible
Alarming, And Warning Devices. |
|
|
|
|
List Alarm Silence, Reset, Zone Identification and
System Trouble Codes. |
|
|
|
|
Locate All Pipes Label Pressure, Diameter, Extinguishing
Agent, Direction of Flow |
|
|
|
Manufacturing, Production, Waste, And Other Systems |
|
|
|
|
Locate And Label All Emergency Devices And Or Panic
Buttons Associated With The System. |
|
|
|
|
Label Waste Removal, Waste Transport Locations and Types |
|
|
|
|
Master Control, Valves, and Switching For the Identified
System |
|
|
|
|
Designate Master Tag-In Tag-Out Locations For The
Identified System. |
|
|
|
|
Locate and Label Hazardous Areas, Materials, and
Equipment |
|
|
|
|
All Pipes Label Pressure, Diameter, Temperature of
Product/Material, Direction of Flow |
|
|
|
|
Label All Personnel Hazards Such As Burns,
Electrocution, Crushing, And Entanglement. |
|
|
Any or all of the items listed above can be added to
your building pre-plan project supplied by Emergency
Preplan Services. The underlying structure and design of
our building pre-plan packages make adding any type of
secondary detailed information quick, simple, and most
of all extremely affordable. How affordable?
Starting as low as $15.00
|
|
 |
